date-created: 2024-04-08 12:32:38 date-modified: 2024-08-28 01:10:43

Ender 3 | Yuria

anchored to 410.00_anchor

Overview:

This is my first 3D printer which I was gifted by 025.19_Svea_Victoria_mann s Dad back in 2018 or so. He bought it once to tinker and play with it yet did not have enough time to make much with it or maintain so he offered me to take it with me to play around and well to learn something - He was the kind to see and hope that people he knows are using their skillset (in case they see some in people) and extend it by tinkering and training. Especially he wanted to give me the opportunity to explore fun topics and things and thus gave me the printer or other tools/material to play and learn with. After receiving it I began learning and playing with the printer and began to mod it soon after as well. My first upgrade were minor parts for aesthetics of the printer, then I upgraded to a better part cooling, then hotend and another pcb (MKS Robin E3). A second Z-screw followed afterwards and I also changed some smaller mechanical parts like the gears, extruder and such.

Feature-Set:

As of now it has the following features:

  • MKS Robin E3 motherboard with Klipper
  • RPI 2 running mainsail, klipper
  • dual z lead screw
  • pei sheet bed + magnet sheet
  • (planned / in progress) stealthburner toolhead with direct drive
    • with 5050 mod link
  • (planned / in progress) electronic housing (switchwire-esque) : https://www.printables.com/model/385532-ender-3-pro-voron-themed-electronics-enclosure/files
  • V6 hotend (trianglelabs) with bowden setup
  • (planned) ceramic heating part
  • BMG Extruder Clone
  • meanwell power supply
  • (planned / in progress) sleeved cables

Log

On DayPlanner-20240407 I cleaned and disassembled the hotend, electronic compartment. I planned to swap the hotend with a heroMe Gen7, however I thought of building an afterburner to refine this whole build a little more. Furthermore I came to think about building the electronics enclosure to have an opportunity to improve my cable management.

Currently Rebuilding with new enclosure and afterburner HOTEND

On DayPlanner-20240518: I was redoing the cables and began sleeving them. Further I have continued assembling the Stealthburner –> decided to build it with a clockwork direct extruder too!

On DayPlanner-20240827

I calibrated her input further, basically testing:

  • overhangs which are currently fine up to 45 Degree
  • print speed –> smth of the speeds of my voron right now, but its not really calibrated for speed either !
  • printing temperature

Whats missing :

  • pressure advance!
  • calibrating resonance –> would help tremendously with ghosting on Y-Axis and X-Axis
  • improved speed!

Her quality is fine so far I think: